News

/News

News about our company, customers, exhibitions, technical and marketing activities,  innovative products such as industrial autoclave, storage tank, dished head or pressure vessel, etc al.

Russian Customer Visited Our Glass Laminating Equipment

Glass Laminating Equipment (also called glass autoclave, glass laminating autoclave or laminated glass autoclave) is the key pressure vessel to make glass safe and strong in the laminated glass production process. Through heat treatment techniques such as pressure and heat, the laminated glass can meet the safety requirements. A Russian customer visited our industrial [...]

By |2018-09-30T08:06:30+00:00September 30th, 2018|News|Comments Off on Russian Customer Visited Our Glass Laminating Equipment

Autoclave for Brick Exported to India

Autoclave for brick is one of industrial autoclave, the key equipment to fabricate autoclaved aerated bricks and aerated concrete. The autoclaved aerated bricks are steamed or cured under high temperature and high pressure using saturated steam as the working media.Autoclave for brick is composed of autoclave body, door, reducer, safe operation device, support saddle and control system. [...]

By |2018-09-20T01:44:37+00:00September 20th, 2018|News|Comments Off on Autoclave for Brick Exported to India

India Customer Showed Great Interest In Torispherical Dish

Torispherical dish, also called torispherical head and torispherical dish end, is widely applied for storage tanks to storage liquids and gases. This kind of torispherical dish is usually composed of a spherical surface, a straight edge of a cylinder with a certain height and a transition part connecting the above two parts with a [...]

By |2018-09-11T02:35:28+00:00September 10th, 2018|News|Comments Off on India Customer Showed Great Interest In Torispherical Dish

Carbon Fiber Autoclave for South Africa Customer

Carbon Fiber Autoclave (usually called carbon autoclave, composite autoclave and autoclave carbon machine) is a kind of pressure vessel that provides the necessary heat and pressure for the compaction and curing of advanced composite materials. Our South Africa customer is the automobile parts manufacturer and wholesaler, our pressure vessel engineer proposed the following technical proposal of carbon [...]

By |2018-08-21T01:05:57+00:00August 20th, 2018|News|Comments Off on Carbon Fiber Autoclave for South Africa Customer

ASME Torispherical Head Will be Placed Order from Pakistan

Asme torispherical head is usually made of carbon steel, stainless steel, cladding steel, austenitic and non-ferritic metals. Asme torispherical head is composed of a spherical surface, a straight edge of a cylinder with a certain height, and a transition part connecting the above two parts with a radius of curvature smaller than the radius of the [...]

By |2018-08-04T05:50:50+00:00August 4th, 2018|News|Comments Off on ASME Torispherical Head Will be Placed Order from Pakistan

What is Dished End

Dished end, also called dished head or tank head, is an important pressure element for pressure vessels and boilers. The dished end is usually used at both ends of the pressure vessel and welded with the cylinder. According to the different geometric shapes, it can be divided into elliptical tank head, torispherical end, hemispherical dish [...]

By |2018-07-26T02:20:40+00:00July 25th, 2018|News|Comments Off on What is Dished End

Mexico Customer Visited Autoclave Curing Process Equipment

Autoclave Curing process(also called carbon fiber autoclave or autoclave carbon machine)is the key factor for the molding of polymer-based carbon fiber, our autoclave curing process equipment are widely applied in aerospace, aviation, defense, electronics, automobiles and other vehicles, boats, sports equipment, etc. Specifications of Autoclave Curing Process Equipment Using diameter: 800 mm Using length: [...]

By |2018-06-29T07:09:19+00:00June 27th, 2018|News|Comments Off on Mexico Customer Visited Autoclave Curing Process Equipment

Tank Head Will be Delivered to Xinjiang Province Next Week

Tank head (also called elliptical head or elliptical dish end) is usually made with carbon steel, stainless steel, Austin and non ferric metals that can be cold processed. The shape of the tank head is more economical, because the height of the tank head is just a fraction of the diameter. The radius of tank head varies [...]

By |2018-06-06T14:28:37+00:00June 6th, 2018|News|Comments Off on Tank Head Will be Delivered to Xinjiang Province Next Week

How to Operate Autoclave Composite

Autoclave Composite is the key equipment mainly used for hot press curing of metal/non-metal bonded structural parts and resin-based high-strength glass fiber, carbon fiber, boron fiber, aramid fiber and epoxy resin composites. The device can realize heating and pressure curing molding under the condition that the composite material is evacuated. Autoclave composite is also the indispensable process [...]

By |2018-05-25T03:01:39+00:00May 23rd, 2018|News|Comments Off on How to Operate Autoclave Composite

Fuel Oil Tank will be Delivered to Pakistan

Fuel oil tank is the kind of oil Storage Tank. It can be used to store and transport diesel oil which keep the stored diesel oil in stable condition. Fuel oil tank is the main equipment for the oil depot. The oil storage tank can be divided into sub-oil tanks and non-metallic oil tanks according to the stored material. The oil tank can be [...]

By |2018-05-11T09:48:38+00:00May 11th, 2018|News|Comments Off on Fuel Oil Tank will be Delivered to Pakistan